Follow

Show

Testing Center

ISO/IEC 17025

Testing

  1. Automobile tyres (TIS 367 : part 1-2532 (1989))
  2. Motorcycle tyres (TIS 682-2540 (1997))
  3. Motorcycle rubber inner tubes (TIS 683-2530 (1987))
  4. Brake lining for automotive (TIS 97-2557 (2014))
  5. Steel bars for reinforced concrete round bars (TIS 20-2543 (2000))
  6. Steel bars for reinforced concrete : deformed bars (TIS 24-2548 (2005))
  7. Metallic materials (JIS Z 2241: 2011)
  8. Low alloy steels (ASTM E 415-14)
  9. Cold reduced carbon steel coil, strip and sheet of commercial and drawing qualities (TIS 2012-2543 (2000))
  10. Hot-rolled carbon steel coil, strip, plate and sheet for general structure (TIS 1479-2541 (1998))
  11. Hot-rolled carbon steel coil, strip, plate and sheet for machine structure (TIS 1501-2552 (2009))
  12. Hot-rolled steel coil, strip, plate and sheet for automobile structure uses (TIS 1999-2543 (2000))
  13. Hot-rolled carbon steel coil, and strip, for pipes and tubes (TIS 1735-2542 (1999))
  14. Hot-rolled carbon steel coil, strip, plate and sheet for welded structure (TIS 1499-2541 (1998))
  15. Hot-rolled steel piles (TIS 1390-2539 (1996))
  16. Cold rolled steel coil strip and sheet for automotives uses (TIS 2140-2546 (2003))
  17. Hot-rolled carbon steel coil, strip, plate and sheet for gas cylinders (TIS 2060-2543 (2000))
  18. Superior atmospheric corrosion resisting hot-rolled steel coil, strip, plate and sheet (TIS 2011-2543 (2000))
  19. Hot-rolled high strength steel coil, strip, plate and sheet with improved formability for automobile structural uses (TIS 1884-2542 (1999))
  20. Hot-rolled structural steel sections (TIS 1227-2539 (1996))
  21. Hot-rolled flat carbon steel of commercial and drawing qualities (TIS 528-2548 (2005))
  22. Standard for hollow structural sections (TIS 107-2533 (1990))
  23. Cold formed structural steel sections (TIS 1228-2549 (2006))
  24. Showers (TIS 2066-2552 (2009))
  25. Faucets for sanitary wares (TIS 2067-2552 (2009))
  26. Shower unit (TIS 1187-2555 (2012)) 
  27. Faucets for sinks (TIS 1277-2555 (2012))
  28. Faucets for wash basins (TIS 1278-2555 (2012))
  29. Self-closing faucets for wash basins (TIS 1377-2555 (2012))
  30. Materials used in occupant compartments of motor vehicles (FMV SS No.302-1998)
  31. Motorcycles, Safety requirements ; emission from engine, Level 6 (TIS 2350-2551 (2008), COMMISSION DIRECTIVE 2003/77/EC, amending Directives 97/24/EC and 2002/24/EC (EURO III))
  32. Light duty compress ignition engined vehicles, Safety requirements ; emission from engine, Level 7 (TIS 2550-2554 (2011), Directive 70/220/EEC (EURO III and EURO IV) and ECE Regulation No.83, the 05 series of amendment, ECE R101 Economic Comission for Europe of the United Nations)
  33.  Light motor vehicle equipped with positive ignition engines fuelled with natural gas or liquefied petroleum gas : safety requirements ; emission from engine, level 1 (TIS 2555-2554 (2011), Directive 70/220/EEC (EURO III and EURO IV) and ECE Regulation No.83, the 05 series of amendment (EURO II and EURO IV), ECE R101 Economic Comission for Europe of the United Nations)
  34. Positive ignition engined vehicles, Safety requirements ; emission from engine, Level 8 (TIS 2540-2554 (2011), Directive 70/220/EEC (EURO III and EURO IV) and ECE Regulation No.83, the 05 series of amendment, ECE R101 Economic Comission for Europe of the United Nations)
  35. Heavy motor vehicle equipped with compression Ignition engines : safety requirement emission from engine , level 4 (TIS 2315-2551(2008) and UNECE R 49-05 Directive 70/156/EEC as last amened by Directive 2005/78/EC (EURO III))
  36. Heavy motor vehicle equipped with positive Ignition engines fuelled with natural gas or liquefied petroleum gas : safety requirement ; emission from engine , level 1 (TIS 2320-2552 (2009) and UNECE R 49-05 Directive 70/156/EEC as last amened by Directive 2005/78/EC (EURO III))
  37. Fogging of trim materials (GMW 3235 : 2011 Method B) 
  38. Safety Helmet for Motorcyclist (TIS 369-2557 (2014)) 
  39. Standard for exhaust system for car, bus and truck (TIS 340 – 2528 (1985)) 
  40. Standard for motorcycle exhaust muffler (TIS341-2543 (2000))
  41. Tyres with regard to rolling sound emission and to adhesion on wet surfaces and/or to rolling resistance (E/ECE/324  E/ECE/TRANS/505 Addendum 116: Regulation No. 117) 
  42. Passenger cars powered by an internal combustion engine or hybrid cars, M1 ans N1 Vehicles powered by electric: emission of carbon dioxide, fuel consumption, electric energy consumption and electric range (TIS 2335-2558(2015) and ECE Regulation No.101 03 series of amendment)
  43. The speedometer equipment including its installation of vehicles (TIS2308-2549 (2006) and E/ECE/324 E/ECE/TRANS/505 Regulation No.39 (Annex 3))
  44. Safety glazing materials on vehicles (TIS2602-2556 (2013) and E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.42/Rev.2 Regulation No.43)
  45. Pneumatic tyres for motor vehicles and their trailers (TIS2718-2558 (2015) and E/ECE/324 E/ECE/TRANS/505 Addendum 29: Regulation No. 30)
  46. Pneumatic tyres for comer commercial vehicles and their trailers (TIS2719-2558 (2015) and E/ECE/324 E/ECE/TRANS/505 Addendum 53: Regulation No. 54)
  47. Pneumatic tyres for motor cycles and mopeds (TIS2720-2558 (2015) and E/ECE/324 E/ECE/TRANS/505 Addendum 74: Regulation No. 75)
  48. Small size water cooled diesel engines (TIS787-2551)  in process for accreditation
  49. Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique (ASTM E 1086-8) in process for accreditation
  50. Liquefied petroleum gas cylinders for internal combustion engine (TIS370-2552) in process for accreditation
  51. Rear-view mirrors (ECE Regulation No.46)  in process for accreditation
To ensure product compliance with both Thai and international stipulated standards, the Institute provides product testing service to industrial enterprises, and tests according to overseas standards, such as JIS, ASTM, for automotive manufacturers.

Modern tools and test methods can be modified by experts to respond to the needs of test demands from the automotive industry, the government organizations, and other related industries.

Currently, the Institute provides the test service for more than 120 items, in the following categories.
  • Test Group for Exhaust from Motorcycle
  • Test Group for Exhaust from Gasoline Engine
  • Test Group for Exhaust from Small Diesel Engine
  • Test Group for Exhaust from Heavy Duty Diesel Engine
  • Test Group for Steel (TIS) and Other Machineries
  • Environmental and Corrosion test for Automotive Parts
  • Other TIS and General Standards